Case specification

Features

• Older USB2 Case - Two front USB ports separated by at least 20mm and that meet the USB2.0 specification.
• Older USB2 Case - One front IEEE1394 port.
• Newer USB3 Case - 2 x USB3.0 and 2 x USB2.0 Ports - No Firewire.
• Front accessible microphone and headphone socket. 
• Power LED built into the on/off switch, blue indicates on.
• HDD LED next to power button illuminates orange when drive is being accessed
• The case supports current µATX form factor layout guidelines. 

Power supply

• Dependent on Chassis - See above.

Front panel

• Blanking panels available for 5¼" and 3½" drive bays.
• Blanking panels withstand 80 Newtons of perpendicular force before giving way.
• Power switch should withstand 80 Newtons of force.
• All buttons and ports are labelled with industry standard label icons.

Storage devices 

• Thermal and mechanical support for a single internal 3½" Disk Drive.
• Thermal and mechanical support for a single internal 2½" Disk Drive.
• External full height 3½" Floppy Drive Bay.
• External full height 5¼" Optical Drive Bay.

Expansion 

• 3 low profile expansion slots:
  
  • 1 x externally accessible low profile AGP/PCI-e slots
  • 3 x externally accessible low profile PCI slots.
  • Both dependant on motherboard fitted.
• Standard pop out replaceable µATX IO panel.

General Regulatory requirements

Certified for:

• CE
• RoHS
• REACH
• Dependent on Mainboard / PSU combination - EuP Lot 3

Security

• Kensington lock slot hole included in rear.
• Mounting plate positions for 17mm reinforced hole for security nut and bolt (Optional extra).

Dimensions (in millimetres)

• Height: 98mm
• Width: 325mm
• Depth: 420mm

Finish

• Black paintwork, Black and Silver Fascia (Older Cases)
• Black paintwork, Black Fascia (Newer Cases)