Product description 

Fujitsu's latest generation of Enterprise 10000 rpm SCSI hard disk drives.

The MAT SCSI series is the latest generation hard disk products from Fujitsu offering low profile, high speed and high capacity to high performance enterprise computing applications.

The MAT (NP) series comes with a 68-pin interface connector, spindle speed of 10K RPM and capacities of 73, 147 and 300GB. Areal density has doubled and internal drive transfer rates have been increased by 22% to 132 MB/s when compared to the previous MAP series. The drive is also equipped with an 8MB multi-segmented data buffer combined with a 32-bit wide internal data path for faster data access.

The MAT NC/NP series supports the Ultra 320 SCSI (320MB/s) interface which offers new performance and reliability enhancing features such as data packet protocol, quick arbitration and selection, and signal pre-compensation.

Leading edge technology enables industry leading performance specifications blended with the latest advances in interface technology, to provide a cost effective storage solution that meets the most demanding enterprise storage requirements.

Specifications

Formatted storage capacity 73.5 GB 
 
  Form Factor 3.5-inch x 1-inch high 
  Mounting screws 6#32UNC 
  Seek time (track to track) Read 0.2 / Write 0.4 milliseconds
  Seek time (average) 4.5/5.0 milliseconds (read/write)
  Seek time (full track) 10.0/11.0 milliseconds (read/write)
  Average latency time 2.99 milliseconds
  Rotational speed 10,025 RPM
  Data Buffer Size 8 MB
  Recording code 32/34 MEEPRML 
  Interface 68 pin (NP Series) U320 SCSI 
  Head positioning method ROTARY VCM 
  Spindle start time 30 seconds typical
  Spindle stop time 30 seconds typical
  Power requirement Idle (ready) 9.5 W (typical)
  Height 25.4 millimetres
  Width 101.6 millimetres
  Depth 146.0 millimetres
  Weight 0.75 kg
  Ambient temperature (operating) 5 to 55 degrees C
  Ambient temperature (non-operating) -40 to 70 degrees C
  Maximum DE surface temperature (operating) 55 max deg. C
  Gradient 15 degrees C per hour
  Relative humidity (operating) 5 to 95 % RH (non-condensing)
  Relative humidity (non-operating) 5 to 95 % RH (non-condensing)
  Maximum wet bulb 29 degrees C (non-condensing)
  Vibration (operating) 0.6mm (5 to 20 Hz)/ 1.0G (20 to 300 Hz) 
  Vibration (non-operating) 3.1mm (5 to 20 Hz)/ 5.0G (20 to 300Hz) 
  Shock (operating) 65G Max (2ms) 
  Shock (non-operating) 225G Max (2ms) 
  Altitude (operating) 3,000 metres
  Altitude (non-operating) 12,000 metres
  Acoustic noise (at 1 metre idle) 3.4 bels
  MTBF (Mean Time Between Failures) 1,200,000 power on hours
  Unrecoverable errors 1 per 10^15 bits read
  Seek errors 10 per 10^8 seeks