| General | 
| Product code | 
EXPI9402PT3 | 
| Connector | 
Two RJ-45 | 
| IEEE standards/network topology | 
10BASE-T, 100BASE-TX, 1000BASE-T | 
| Wiring | 
Category-5, UTP, 4-pair | 
| 
 Adapter product features  | 
| Intel® PROSet Utility and Intel® PRO Intelligent Install for easy installation | 
x | 
| Intel® lead-free2 technology | 
x | 
| Plug and play specification support | 
Standard | 
| Auto-negotiation, full-duplex capable | 
x | 
| Integrated media access control (MAC) and physical layer (PHY) | 
x | 
| Includes full-height and low-profile bracket options | 
x | 
| Cable distance | 
100 m in Category-5 for 100/1000 Mbps; Category-3 for 10 Mbps | 
| 
 Network management  | 
| Wired for management (WfM) baseline v2.0 enabled for servers | 
x | 
| DMI 2.0 support, Windows Management Instrumentation (WMI) and SNMP-manageable SMBus support | 
x | 
| Remote Installation Services (RIS) | 
x | 
| Diagnostics (loopback, testability, PHY register access) | 
x | 
| Advanced configuration and power interface (ACPI) 1.0 power management | 
x | 
| Wake on LAN* support over PCI Express* | 
x | 
| PXE 2.0 enabled through boot read-only memory (ROM) | 
x | 
| 
 Network operating systems (NOS) software support  | 
| Microsoft Windows* Server 2003, Enterprise, Datacenter (32- & 64-bit)  | 
x | 
| Microsoft Windows 2000  | 
x | 
| Red Hat Linux* 2.4x or later (32- and 64-bit) | 
x | 
| FreeBSD 4.x or later | 
x | 
| Novell Netware* 5.x, 6.x | 
x | 
| Sun Solaris* x86, OS 8 and later | 
x | 
| SCO Open Server 5, OpenUNIX 8*  | 
x | 
| 
 Advanced software features   | 
| Adapter fault tolerance (AFT) | 
x | 
| Switch fault tolerance (SFT) | 
x | 
| Adaptive load balancing (ALB) | 
x | 
| Fast EtherChannel*4 (FEC) | 
x | 
| Gigabit EtherChannel*4 (GEC) | 
x | 
| Teaming support  | 
Scales up to four connections | 
| Multiple teams  | 
Supports two separate teams, maximum | 
| IEEE 802.3ad* (link aggregation control protocol)4  | 
x | 
| Test switch configuration  | 
Tested with major switch original equipment manufacturers (OEMs) | 
| PCIe Hot Plug*/Active peripheral component interconnect (PCI) | 
x | 
| IEEE 802.1Q* VLANs | 
x | 
| IEEE 802.3* (z, ab, u, x) flow control support | 
x | 
| TCP checksum offload - transmission control protocol (TCP), user datagram protocol (UDP), Internet protocol (IP) | 
x | 
| IEEE 802.1p* | 
x | 
| TCP checksum/large send offload  | 
x | 
| Interrupt moderation  | 
x | 
| 
 Technical features  | 
| Data rate(s) supporter per port  | 
10, 100, and 1000 Mbps | 
| Bus type  | 
PCI Express 1.0a | 
| Bus width  | 
x1 Lane PCI Express, operable in x1, x4,x8, x16 slots | 
| Bus speed (x1, encoded rate)  | 
2.5 Gbps uni-directional; 5 Gbps bi-directional | 
| EEPROM-SPI and single EEPROM support  | 
x | 
| Interrupt levels  | 
INTA | 
| IEEE support  | 
802.3ab* | 
| Hardware certifications | 
FCC B, UL, CE, VCCI, BSMI, CTICK, MIC | 
| Controller-processor  | 
Intel® 82572GI | 
| Typical power consumption  | 
3.3 W (3.3 V @ 1 A) | 
| Operating temperature  | 
0-55º C | 
| LEDs  | 
2 (1/port, link and speed) solid and blinking | 
Physical dimensions
  | 
| Length  | 
12.9 cm (5.1 in) | 
| Width (standard bracket)  | 
2.2 cm (0.85 in) | 
| Width (low-profile bracket) | 
1.8 cm (0.725 in) | 
| Height of full-height end bracket | 
12.0 cm (4.725 in) | 
| Height of low-profile end bracket | 
7.9 cm (3.1 in)  |