Fujitsu's latest generation of Enterprise 10000 rpm and 15000 rpm SCSI hard disk drives.

The MAT SCSI series is the latest generation of hard disk products from Fujitsu offering low profile, high speed and high capacity to high performance enterprise computing applications.

The MAT (NC) series comes with a 80-pin SCA2 interface connector, spindle speed of 10K RPM and capacities of 73, 147 and 300GB. Arial density has doubled and internal drive transfer rates have been increased by 22% to 132 MB/s when compared to the previous MAP series. The drive is also equipped with an 8MB multi-segmented data buffer combined with a 32-bit wide internal data path for faster data access.

The MAT NC/NP series supports the Ultra 320 SCSI (320MB/s) interface which offers new performance and reliability enhancing features such as data packet protocol, quick arbitration and selection, and signal pre-compensation.

Leading edge technology enables industry leading performance specifications blended with the latest advances in interface technology, to provide a cost effective storage solution that meets the most demanding enterprise storage requirements.

Specifications

• Formatted storage capacitys of 73GB or 147GB
• Form Factor 3.5-inch x 1-inch high.
• Mounting screws 6#32UNC.  
• Seek time (track to track) read 0.2 / write 0.4 milliseconds. 
• Seek time (average) 4.5/5.0 milliseconds (read/write).
• Seek time (full track) 10.0/11.0 milliseconds (read/write).
• Average latency time 2.99 milliseconds.
• Rotational speed 10,000 or 15,000 RPM
• Data buffer Size 8MB.
• Recording code 32/34 MEEPRML.
• Interface SCA-2 (NC series) or Fixed 68 pin (NP Series) U320 SCSI.
• Head positioning method ROTARY VCM.
• Spindle start time 30 seconds typical.
• Spindle stop time 30 seconds typical.
• Power requirement idle (ready) 9.5 W (typical).
• Height 25.4 millimetres.
• Width 101.6 millimetres. 
• Depth 146.0 millimetres.
• Weight 0.75 kg.
• Ambient temperature (operating) 5 to 55 degrees C.
• Ambient temperature (non-operating) -40 to 70 degrees C.
• Maximum DE surface temperature (operating) 55 max degrees C.
• Gradient 15 degrees C per hour.
• Relative humidity (operating) 5 to 95% RH (non-condensing).
• Relative humidity (non-operating) 5 to 95% RH (non-condensing).
• Maximum wet bulb 29 degrees C (non-condensing).
• Vibration (operating) 0.6mm (5 to 20 Hz)/1.0G (20 to 300 Hz).
• Vibration (non-operating) 3.1mm (5 to 20 Hz)/ 5.0G (20 to 300Hz).
• Shock (operating) 65G max (2ms).
• Shock (non-operating) 225G max (2ms).
• Altitude (operating) 3,000 metres.
• Altitude (non-operating) 12,000 metres.
• Acoustic noise (at 1 metre idle) 3.4 bels. 
• MTBF (Mean Time Between Failures) 1,200,000 power on hours.
• Unrecoverable errors 1 per 10^15 bits read.
• Seek errors 10 per 10^8 seeks.